Operational Modes

Constant Speed Mode - Pump runs continuously at a constant speed which can be set by the user.

EcoSmart Nutrient Transport Mode (NTM) - A two phase program to promote maximum health and nutrient export, as well as increased growth for corals. Alternates between a resonant standing wave and a surge effect to stir up and export nutrients.

EcoSmart Tidal Swell Mode (TSM) - Creates a harmonic balance in your aquarium reminiscent of the changing flow conditions that would be found in nature. Flow varies from left to right, right to left, calm, and ends with a great surge.

Reef Crest Random Mode - Reef Crest Random Mode simulates the high-energy conditions of a natural reef crest environment.

Lagoonal Random Mode - Simulates the gentler reef zone found in a natural lagoon.

Short Pulse Mode - Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Use this mode to create a resonant standing wave.

Long Pulse Mode - Allows for wave pulse timings of between 2 seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank.

Feed Mode - Slows down pump to allow user to feed aquarium. User can select the duration and speed for Feed Mode.

Night Mode - Automatically reduce speed and operates continuously at that speed for a period of time during the night. User can select the duration and speed for Night Mode.

Battery Backup Mode - When used with our battery backup accessory, the VorTech pump will switch to Battery Backup Mode in the event of a power outage and will operate at a user set speed. The LED’s on your EcoSmart driver will count down to indicate how much power is available within the battery.

Auto-Dim - LED’s are turned off and display knob dimmed significantly, but pump functions in its current mode. User can program how long after use before the driver enters Auto-Dim.

On/Off Switch - Tap the on/off switch to turn off and turn on a pump. Hold this button to turn off all pumps in a master/slave group. Tap any pump in the groups’ on/off switch and that pump will turn back on.

Flow: 200 to 1575 gph
Wattage: 8 to 18 watts
Maximum Tank Thickness: 3/8″
Appropriate Tank Size Range: 2.5 to 50 gal
Dimensions: Wet Side- 2.5″ diameter by 1.5″ long, Dry Side – 2.5″ diameter by 2″ long
Clearance Needed Behind Aquarium: 2.25″

MP10 Downloads

MP10 Datasheet:  PDF
MP10 Manual:  PDF
EcoSmart Quick Start Manual: PDF
EcoSmart Full Instruction Manual: PDF