The entirely new OSMOCONTROLLER Digital uses a patent pending sensor with no moving parts as the first measure of the water level in the SUMP. Most other systems will use multiple float switches or sensors to act as back up to the initial float switch, elos does not. We believe the float switch or sensor will always be the weak link as it is usually a moving part and/or in direct contact with the water, most of the time. To provide an adequate fail-safe the OSMOCONTROLLER Digital uses a small microprocessor in combination with our patent pending sensor to control the pump and monitor the top off of your system. In the event of a fault such as an empty reservoir, a damaged pump or kinked tube, the microprocessor will recognize this and a red alarm LED will indicate the problem and stop pumping until the problem is fixed and the controller can be reset. The OSMOCONTROLLER Digital also has a manual top off button that can be used to use the system as a pump for occasional water changes and to fill a container with RO/DI water easily.

The set up of the OSMOCONTROLLER Digital is very simple. It works with most sumps without the need for programming and with our sensor design has a built in buffer for waves and small changes in the sump that will normally cause a top off system to unnecessarily top off, which will shorten the useable life of the top off pump.

Key Benefits of the OSMOCONTROLLER Digital:

   No moving parts
   Very easy setup. (System runs a 5 minutes self-diagnostic test when it is first plugged in.)
   Maintains a very accurate level, very important in marine systems for a stable salinity level when keeping delicate animals.
   Adapts to most aquarium/sump sizes automaticall

ELOS: the ultimate supplements and equipments for marine and planted aquariums. Elos is an aquaristik company that is exclusively dedicated towards the development, production, and marketing of specialised, high quality products for the aquarium market. We apply the latest advances in marine and fresh water sciences into our manufacturing and products. We are environmentally responsible as well as respectful of the key ethic rules on employment and production. Almost all our products are made in Italy, through few, well trained Internal Employee with the help of key external suppliers, Universities and Research Centres. Our commitment is to invest in the future, we take great care of details and innovations but beside this we also take care of our traditions. We apply modern process, but we also use traditional techniques, employing local craftsmen for the production. We take great care in designing our products, and packs to simplify their use making them pleasant to see and to touch. From the first contact with our products you will immediately perceive the care to produce them and the great attention toward each single detail. For all this we invite you, by heart, to try our products. Join your passion with us, use our products and make the best out of them and, we are sure, You will experience the delight of creating your personal, unique underwater world in a beauty you have never seen before.