|
MP20 to MP40w Driver Upgrade Kit
The
VorTech Wireless Wave Driver will upgrade an MP20 model pump to an
MP40w model allowing for wireless communication between this and other
MP40w pumps. To execute this upgrade, simply unsnap the MP20 driver
box, gentle remove the motors plug from the MP20 driver board, and
plug this into the new Wireless Wave Driver board. Now, gently snap the
new box top onto the base and enjoy the upgraded flow, many modes, and
wireless communicating functionally inherent in your new upgraded MP40w
pump! Multiple Wireless Wave Drivers can wireless communicate with one
another to coordinate random and pulse wave modes. Wave Modes
Reef Crest Random Mode-
set the potentiometer to your maximum desired speed and the VorTech
Wireless Wave Driver automatically randomizes the flow throughout your
tank. The pump will vary from one speed to another rapidly to simulate
the high-energy conditions of a natural reef crest environment.
Lagoon Random Mode-
set the potentiometer to your maximum desired speed and the VorTech
Wireless Wave Driver automatically randomizes the flow throughout your
tank. The pump will vary slowly from one speed to another to simulate a
calmer, lagoonal reef environment.
Synch Pulse Mode-
When entered into Synch Pulse Mode, pumps will automatically synch with
the master pump to provide pulsing flow throughout the aquarium. The
potentiometer is used to adjust the maximum speed and then is used to
adjust the frequency. The minimum speed is automatically set to the
minimum pump speed to create as strong a pulse as you desire. Other
pumps can be placed on the same side of the aquarium as the master pump
to create standing waves in your tank.
Anti-Synch Pulse Mode-
When entered into Anti-Synch Pulse Mode, pumps will operate inverse to
the master pump. Therefor, everytime the master pump is at the maximum
speed of the pulse cycle, the slave pumps entered into Anti-Synch Pulse
Mode will be at the minimum speed of the pulse cycle, and vice-versa.
Place these pumps on the opposite side of the tank as a master pump to
create tidal currents within your aquarium.
Feed Mode
When any one pump is entered into feed mode, all pumps shut down for 10 minutes to allow you to feed your aquarium.
Battery Backup
The Wireless Wave Driver can also be used with the battery backup accessory. |
